banner

Strong Medicine Photostability Test Chamber

XCH-TPS medicine high-light stability chambers is equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled.


Model: 150TPS~500TPS

TEMP Range: 15~50℃

Fluctuation: <±0.5℃

TEMP Deviation: < ±2.0℃(SAME LEVEL)
Light Range: Visible light range: 100 ~ 8000LUX
Total illumination should not be less than 1.2 x 10^6Lux·hr
UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡
UV wavelength: NUV wavelength: 320 ~ 400nm;

  • Item no.:

    150TPS-500TPS
  • Product origin:

    China

 Strong Medicine Photo Stability Test Chamber

What is stability chamber? It is a advanced humidity controlled stability chambers for precise temperature control. FDA/ICH Approved. XCH stability test chamber can be equipped with near-ultraviolet lamps, meeting the requirements of the guidelines for the stability test of the 2020 edition of the Pharmacopoei. And widely used for research on the pharmaceutical industry,Medical industry,Biotechnology industry and other life science-related industries.

Key Features:

• Temperature Control: Temperature Fluctuation ≤ ±1.0℃,Temperature Deviation ≤ ±2.0℃(Same layer)


• Illumination Control: The total illumination is not less than 1.2×106 Lux·hr,Near ultraviolet energy is not less than 200w·hr/m2


• Light Source Design: Top light source design, the sample of different position of shelf has good uniformity of receiving light source irradiation


• Insulation material: Integral polyurethane foam technology, with good heat preservation and moisture retention performance


• Chamber Material: The liner is made of mirror stainless steel 304, no pollution source, easy to clean,the out shell is plastic sprayed steel plate


• Refrigerating System: The imported fully enclosed industrial compressor, long-life, low noise.


• Control System: The imported digital display illuminance controller,High control accuracy.


• Safety device: compressor overheat and overpressure overload protection, Fan overheat protection.


• Dual Protection: Equipped with independent overtemperature protection system, can automatically cut off the power supply


• Data Record: Equipped with data collection system conform to GMP requirements,Needle micro printer and USB output port as standard


• Meet a criterion: Meet ICHQ1B、Chinese Pharmacopoeia 2020 edition


• Installed Power: AC220V±10% 50HZ


• Environment temperature: +5~35℃


• SMS alarm: Optional.


Stability chamber specification:

MODEL

TEMP RANGE

CAPACITY(L)

INTERNAL DIMEN(mm)

W×D×H

EXTERNAL DIMEN(mm)

W×D×H

POWER(KW)

TRAY

SystemIllumination range
Remarks

XCH-150TPS

15~50℃

150

650×490×500

800×790×1250

1.0

1


Visible light:
100 ~ 8000Lux
Near UV:
0.84 ~ 5w/m2

1*independent light source system
1*printing storage system

XCH-150TPS
15~50℃

250

600×500×830

760×870×1650

1.5

2


2*independent light source system
2*printing storage system


XCH-150TPS
15~50℃

500

680×680×1070

840×1050×1850

2.2

3


3*independent light source system
Print and store 3 layers of data


XCH-150LTPS

2~30℃

250

600×500×830

760×870×1650

1.5

1

Visible light:
100 ~ 5000Lux
Near UV:
0.84 ~ 1w/m

1*independent light source system
1*printing storage system

XCH-150LTPS
2~30℃
500
680×680×1070
840×1050×1850
2.2 2
2*independent light source system
Print and store 2 layers of data


Advantages:

No maintenance.No pollution source
High sensitivity, low annual drift
High precision

Safety,with alarm system

Related Products
Low Temperature Test Chamber, high temperature chamber, temperature chambers, low temperature test chamber
The High and Low Temperature and Humidity Chamber used for adaptability test of electrical and electronic products, components and materials in storage, transportation and use under high temperature and low temperature test chamber. Model: 100GDB-1000GDB TEMP Range: -40~150℃ Temperature Fluctuation < ±0.5℃ Temperature Deviation < ±2.0℃ Heating Rising Rate: 1 ~ 3℃ /Min Cooling Fall Rate: 0.7 ~1℃ /Min Environment temperature: +5 ~ 35℃ Power: AC220V±10% 50HZ

View more

Biomedical Refrigerator, pharmacy fridge, Medicine Refrigerator
The medical refrigerator is mainly used to store medicines, reagents, vaccines, biological products, blood products, etc., with a temperature range of 2-8°C, professional medical grade refrigerator. Model: 250BC~2000BC Temperature Control: Temperature Fluctuation ≤ ±1℃ ,Temperature Deviation ≤ ±2.0℃ Installed Power: AC220V±10% 50HZ Environment temperature: +5~35℃ Optional: Data storage and printing.SMS Alarm(With power off alarm)

View more

Medicine Stability Testing Chamber,Temperature Humidity  Chamber, Medicine Testing Chamber
The single door medicine drug stability environmental testing chamber, using advanced high-quality components and manufacturing technology, stable and reliable performance, suitable for GMP certified users. Creates a temperature, humidity, light environment for drug stability evaluation. Suitable for accelerated testing, long-term testing, wet test, climatic test and strong light irradiation test. Model: 150SD~500SD-2 Capacity: 150L~500L TEMP Range: 10~65℃ Fluctuation: <±0.5℃ Deviation:<±1.0℃ Humidity Range: 20~95% Fluctuation: <±3.0%RH Deviation:<±3.0%RH Environment temperature: +5 ~ 35℃

View more

Laboratory incubator,Biochemical incubator,bod cooling incubator
This Biochemical Laboratory incubator Mildew incubator uses the latest air duct system to achieve the best level of uniformity of temperature and humidity in different positions inside the chamber. The bod cooling incubator Polyurethane foam technology is adopted, good insulation, energy saving. Ideal for school laboratories,clinical and industrial for physicians' offices,etc. also as a general-purpose warming cabinet. Model: 150LRH~500LRH TEMP: 0~60℃ Capacity: 150L~500L • Installed Power: AC220V±10% 50HZ • Environment temperature: +5~35℃ • Optional: Humidity display fuction,data storage,data printing

View more

Benchtop Heating Incubator,Constant Temperature Incubator,Constant climate chamber
The electric heating incubator is an incubator with excellent temperature uniformity. The digital bacteriological incubator Equipped with a special temperature controller, fast induction, small system error. Model: 9050DHP~9600DHP Environment temperature: +5 ~ 35℃ Temperature Fluctuation ≤ ±0.5℃ Temperature Uniformity ≤ ±1.5℃(@37℃) • Timing Range: 1-9999min • Power: AC 220V±10% 50HZ • Optional : printer or RS485 interface

View more

Laboratory Drying Oven, High Precision Drying Ovens, Vacuum Drying Oven
XCH high precision vacuum drying oven for laboratory, used for temperature or gas sensitive vacuum drying and storage. The vacuum drying oven is suitable for hot places in a vacuum environment such as defoaming, dehydration, hardening and drying after cleaning treatment in the production process of electronic products. Model: 6050ZK-6500ZK Environment temperature: +5 ~ 35℃ Temperature Fluctuation: ±1.0℃ Temperature Accuracy: ±0.1℃ Power: AC 220V±10% 50HZ Vacuum degree: vacuum indicator display

View more

constant temperature test chamber, high and low temperature test chamber, Constant Temperature Chamber
Constant temperature test chamber, a perfect stability climatic chamber, equipped with programmable color touch screen controller. It was used in temperature and humidity test chamber of electrical and electronic products, materials, textile, medicine package, etc. Model: 150CT-500CT Temp.Range: 10℃~100℃ Temperature Fluctuation: <±0.5℃ Temperature deviation:<±1.0℃ Humidity deviation:<±3%RH(control humidity>75%RH), <±5%RH(control humidity≤75%RH) Power: AC 220V±10% 50HZ

View more

Temperature chamber,Constant climate chamber,Mildew incubator
Digital Bacteriological Incubator for Microbial culture research, such as bacteria, mold, microbial culture, preservation, plant cultivation, and breeding experiments. The Mildew incubator Loved by research institutes at home and abroad. -- LCD program controller -- Standard data storage and printing -- With UV disinfection lamp Model: 150MJ~1000MJ/MJS Temp.Range: 0℃~60℃ Humi.Range: 40~90%RH Fluctuation: ±0.5℃ Deviation: ±1.0℃ Capacity: 150L~1000L Environment temperature: +5 ~ 35℃

View more

Contact Now

Contact Now

Home

Products

Email

whatsapp