Labrotary Mold Incubator 250L
Mold Incubator/Mildew Incubator, the ideal choice for for water body analysis, BOD detection, mold and other microorganism cultivation.
Key Features Overview:
• Adopt the latest airduct system achieves good uniform of temperature
• Polyurethane integral foam, good insulation performance, more energy saving.
• The inner liner is made of 304 mirror stainless steel
• The imported brand fully enclosed compressor, long-term use, stable performance
• Equipped with independent overtemperature protection system, Protect samples and equipment safety
• Microcomputer temperature controller
Double glass door observation window: adopted to facilitate observation of samples inside the box.
Inner Light: Convenient for observing samples
UV sterilizing lamp: Convenient use for sterilization
Humidity: Lab Mold Incubator 250L(with humidity control)
Optional Function: Data record; Printing
Model and Parameters:
Model |
Temp Range(℃) |
Capacity(L) |
INTERNAL DIMEN(mm) |
EXTERNAL DIMEN(mm) |
Power(KW) |
TRAY |
XCH-150MJ |
0-60 |
150 |
520×460×600 |
620×690×1300 |
0.5KW |
3 |
XCH-250MJ |
250 |
520×460×1050 |
620×690×1650 |
0.6KW |
3 |
|
XCH-400MJ |
400 |
600×700×950 |
760×1060×1750 |
1.0KW |
3 |
|
XCH-500MJ |
500 |
680×680×1070 |
840×1050×1850 |
1.2KW |
4 |
|
XCH-800MJ |
800 |
1200×490×1360 |
1360×850×1960 |
1.5KW |
4 |
|
XCH-1000MJ |
1000 |
1400×510×1400 |
1560×870×1980 |
2.0KW |
4 |
Remark:
* Volatility, High temperature: ±0.5℃; Low temperature: ±1℃. Uniformity: ±1 .0℃ (at 37℃)