photostability chamber, temperature controlled chamber, Medicine Stability Chamber

Photostability Test Chamber XCH-500LTPS

XCH-500LTPS photostability chamber, is a temperature controlled chamber, equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled.

Model: 500LTPS

TEMP Range: 2～30℃

Fluctuation: ＜±1℃

TEMP Deviation: ＜ ±2.0℃(SAME LEVEL)
Light Range: Visible light range: 100 ~ 8000LUX
Total illumination should not be less than 1.2 x 10^6Lux·hr
UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡
UV wavelength: NUV wavelength: 320 ~ 400nm;

Item no.:
150TPS-500TPS
Product origin:
China

request a quote

Product Overview

Photostability Test Chamber XCH-500LTPS

This Photostability Test Chamber is a advanced temperature controlled stability chambers for precise temperature control. ICH Approved. XCH stability test chamber can be equipped with near-ultraviolet lamps, meeting the requirements of the guidelines for the stability test of the 2020 edition of the Pharmacopoei. And widely used for research on the pharmaceutical industry,Medical industry,Biotechnology industry and other life science-related industries.

Key Features:

• Temperature Control: Temperature Fluctuation ≤ ±1.0℃，Temperature Deviation ≤ ±2.0℃（Same layer）

• Illumination Control: The total illumination is not less than 1.2×106 Lux·hr，Near ultraviolet energy is not less than 200w·hr/m2

• Light Source Design: Top light source design, the sample of different position of shelf has good uniformity of receiving light source irradiation

• Insulation material: Integral polyurethane foam technology, with good heat preservation and moisture retention performance

• Chamber Material: The liner is made of mirror stainless steel 304, no pollution source, easy to clean,the out shell is plastic sprayed steel plate

• Refrigerating System: The imported fully enclosed industrial compressor, long-life, low noise.

• Control System: The imported digital display illuminance controller,High control accuracy.

• Safety device: compressor overheat and overpressure overload protection, Fan overheat protection.

• Dual Protection: Equipped with independent overtemperature protection system, can automatically cut off the power supply

• Data Record: Equipped with data collection system conform to GMP requirements,Needle micro printer and USB output port as standard

• Meet a criterion: Meet ICHQ1B、Chinese Pharmacopoeia 2020 edition

• Installed Power: AC220V±10% 50HZ

• Environment temperature: +5~35℃

• SMS alarm: Optional.

Stability chamber specification:

MODEL	TEMP RANGE	CAPACITY(L)	INTERNAL DIMEN(mm) W×D×H	EXTERNAL DIMEN(mm) W×D×H	POWER(KW)	TRAY	SystemIllumination range	Remarks
XCH-150TPS	15～50℃	150	650×490×500	800×790×1250	1.0	1	Visible light: 100 ～ 8000Lux Near UV: 0.84 ～ 5w/m2	1independent light source system 1printing storage system
XCH-300TPS	15～50℃	300	550×660×770	850×1030×1570	1.5	2		2independent light source system 2printing storage system
XCH-500TPS	15～50℃	500	680×680×1070	840×1050×1850	2.2	3		3*independent light source system Print and store 3 layers of data
XCH-300LTPS	2～30℃	300	550×660×770	760×870×1650	1.5	1	Visible light: 100 ～ 5000Lux Near UV: 0.84 ～ 1w/m	1independent light source system 1printing storage system
XCH-500LTPS	2～30℃	500	680×680×1070	840×1050×1850	2.2	2		*2independent light source system Print and store 2 layers of data**

Advantages:

No maintenance.No pollution source
High sensitivity, low annual drift
High precision

Safety,with alarm system

Inquiry now

Contact Now

Please fill in correct email address and phone number, to make it sure for us to reach you. Thanks.

Tags :

Categories

Related Products

Photo Stability Chamber, Medicine Stability Chamber

250L Photostability Chamber Temperature Stability Chamber

XCH-250TPS photostability chamber is a temperature controlled chamber, equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 250TPS TEMP Range: 15~50℃ Fluctuation: ＜±1℃ TEMP Deviation: ＜ ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

Photo Stability Test Chamber, Medicine Stability Chamber,

Strong Medicine Photostability Test Chamber 150TPS

XCH-150TPS medicine Photostability Test Chamber is equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 150TPS TEMP Range: 15~50℃ Fluctuation: ＜±1℃ TEMP Deviation: ＜ ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

Photostability Test Chamber, Temperature Stability Chamber XCH-500TPS

XCH-500TPS temperature stability chamber, is a quality Photostability Chamber, equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 500TPS TEMP Range: 15~50℃ Fluctuation: ＜±1℃ TEMP Deviation: ＜ ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

Photostability Test Chamber XCH-300LTPS

XCH-300LTPS medicine Photostability Chamber, temperature controlled chamber is equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 300LTPS TEMP Range: 2～30℃ Fluctuation: ＜±1℃ TEMP Deviation: ＜ ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

constant temperature test chamber, high and low temperature test chamber, Constant Temperature Chamber

Single Door Constant Temperature Test Chamber

XCH-150CT Constant temperature test chamber, a perfect stability climatic chamber, equipped with programmable color touch screen controller. It was used in temperature and humidity test chamber of electrical and electronic products, materials, textile, medicine package, etc. Model: 150CT Temp.Range: 10℃～100℃ Temperature Fluctuation: ＜±0.5℃ Temperature deviation:＜±1.0℃ Power: AC 220V±10% 50HZ

Medicine Storage Refrigerator, Storage Refrigerator for Vaccines, Medical Refrigerator, Pharmaceutical Factories

Medicine Storage Refrigerator for Vaccines and Pharmaceutical 500L

XCH-500MR series Medicine Storage Refrigerator is mainly used to save drugs, reagents, vaccines, biological products and blood products, etc., The medical refrigerator for vaccines temperature range is 2-8 ℃, the cooling system, digital temperature control system, air circulation system, temperature sensor, etc. Model: XCH-500MR Temperature Control: Temperature Fluctuation ≤ ±1℃ ,Temperature Deviation ≤ ±2.0℃ Installed Power: AC220V±10% 50HZ Environment temperature: +5~35℃ Optional: Data storage and printin S Alarm(With power off alarm),Multiple devices can share one mobile card.

Water Jacketed Incubator,Thermostatic Incubator,Constant Temperature Incubator

Water Jacketed Incubator 160L(RT+5℃ ～ 65℃)

XCH-9160GHP Water jacketed incubator, Dedicated temperature controller, the temperature control accuracy error is small.Optional UV sterilization system can effectively kill the floating bacteria in the circulating air in the box。 Used for bacterial incubation, cultivation, ferment and other thermal experiments on hygiene, medicine, biochemistry, industry and agricultural science.The water jacketed incubator is an essential equipment for scientific research laboratories. Model: 9160GHP Temperature Fluctuation ≤ ±0.3℃ Temperature Uniformity ≤ ±0.5℃（@37℃） Timing Range: 1-9999min Power: AC 220V±10% 50HZ Environment temperature: +5 ～ 30℃

Heating Incubator,Constant Temperature Incubator,Constant climate chamber

Digital Electric Heating Incubator 400L (RT+5℃ ～ 65℃)

XCH-9402DHP Electric Heating Incubator. Excellent temperature uniformity. Digital bacteriological incubator equipped with a special temperature controller, fast induction, small system error. The Electric Heating Incubator is widely used for bacteria culture, fermentation and constant temperature test in medical and health, pharmaceutical industry, biochemistry, agricultural science and other scientific research and industrial production departments. Model: XCH-9402DHP Temperature Fluctuation ≤ ±0.5℃ Temperature Uniformity ≤ ±1.5℃（@37℃） Timing Range: 1-9999min Power: AC 220V±10% 50HZ Environment temperature: +5 ～ 35℃ Optional: Printer or RS485 interface

BOD incubator,laboratory incubator manufacturer,cooling incubator,Refrigerated incubator

Large Capacity Biochemical BOD Lab Incubator

XCH-800LRH Biochemical Incubator & Cooling Incubatoruses the latest air duct system to achieve the best level of uniformity of temperature and humidity in different positions inside the chamber. The bod cooling incubator Polyurethane foam technology is adopted, good insulation, energy saving. Provides precise temperature control for reliable results in pharmaceutical, industrial testing, food, cosmetics, and microbiological research. LHR Series Biochemical Laboratory incubators is applied to scientific research and production departments such as environmental protection, sanitation and epidemic prevention, agricultural and livestock aquatic medicine detection and cell culture. Model:800LRH Capacity:800L TEMP:0~60℃ Fluctuations:High TEMP ≤ ±0.5℃; Low TEMP ≤ ±1.0℃ Uniformity≤ ±1.5℃ （@25℃） Installed Power:AC220V±10% 50HZ Environmental Temperature:+5~35℃

Medicine Stability Chamber Temperature humidity chamber Stability chambers in pharmaceutical Photostability Chamber Environmental test chamber Stability chamber for pharmaceutical Walk-In Stability Chamber Walk-In chamber Stability test chambers constant temperature chamber

Contact Now

Contact Now

Home

Products

Photostability Chamber 150-500L

Photostability Test Chamber XCH-500LTPS

250L Photostability Chamber Temperature Stability Chamber