Low Temperature Test Chamber, high temperature chamber, temperature chambers, low temperature test chamber

High and Low Temperature Test Chamber

The High and Low Temperature and Humidity Chamber used for adaptability test of electrical and electronic products, components and materials in storage, transportation and use under high temperature and low temperature test chamber.

Model: 100GDB-1000GDB

TEMP Range: -40~150℃

Temperature Fluctuation ＜ ±0.5℃

Temperature Deviation ＜ ±2.0℃
Heating Rising Rate: 1 ～ 3℃ /Min

Cooling Fall Rate: 0.7 ～1℃ /Min
Environment temperature: +5 ～ 35℃
Power: AC220V±10% 50HZ

Item no.:
100GDB-1000GDB
Product origin:
China

request a quote

Product Overview

High and Low Temperature Test Chamber

The High and Low Temperature Test Chamber used for adaptability test of electrical and electronic products, components and materials in storage, transportation and use under high temperature and low temperature environment.

Key Features:

• Airduct System: Adopt the latest airduct system design achieves good uniform of temperature form different parts inside the chamber.

• Chamber Materials：The exterior is coated with high quality steel plate，The liner is made of mirror stainless steel 304

• Refrigeration System: The imported fully enclosed industrial compressor, high efficiency, low noise, stable continuous operation.

• Control system: Programmable chromatic touch screen controller，With multi - segment program and constant value function.

• Data management: With electronic data storage function,Data can be exported by USB flash drive.

• Safety Device: Compres or overheat protection and overload protection，Fan overheating protection,overtemperature protection alarm.

• Sound-light alarm: Temperature upper and lower limit deviation alarm.

• Temperature control accuracy: Temperature Fluctuation ＜ ±0.5℃ ,Temperature Deviation ＜ ±2.0℃

• Temperature control rate: Heating Rising Rate: 1 ～ 3℃ /Min,Cooling Fall Rate: 0.7 ～ 1℃ /Min

• Environment temperature: +5 ～ 35℃

• Power: AC220V±10% 50HZ

Model & Parameters:

MODEL	TEMP CONTROL RANGE( ℃ )	CAPACITY(L)	INTER DIMEN W×D×H(mm)	EXTER DIMEN W×D×H(mm)	Shelf (Standard)	REMARK
XCH-100GDB	-40 ～ 150	100	450×450×500	680×1040×1570	2	Customized for different TEMP ranges
XCH-250GDB	-40 ～ 150	250	600×600×700	1100×1000×1900	2
XCH-500GDB	-40 ～ 150	500	800×700×900	1280×1180×2000	3
XCH-1000GDB	-40 ～ 150	1000	1000×1000×1000	1500×1500×2200	4

Application:

Used for adaptability test of electrical and electronic products, components and materials in storage, transportation and use under high temperature and low temperature environment.

Advantages:

Sensitive, small system error
Programmable color touch screen controller
No pollution source and is easy to clean
Easy to operate

Inquiry now

Contact Now

Please fill in correct email address and phone number, to make it sure for us to reach you. Thanks.

Tags :

Categories

Related Products

Constant Temperature Test Chamber, high temperature chamber

High Temperature Constant Temperature Test Chamber

The high temp high humidity test chamber simulates harsh weather conditions to test the product's ability to withstand extreme temperatures and humidity, analyze and evaluate whether components and materials can be stored, transported and used at high and low temperatures for a long time in the terminal market without damage. The XCH benchtop environmental chamber has a capacity range from 100L to 1000L Model: 100GW-1000GW/GWH TEMP Range: RT+10 ～ 200℃ Fluctuation: ＜±0.5℃ Deviation: ＜±2.0℃(＜200℃) Deviation: ＜±3.0℃(200℃~300℃)

High And Low Temperature Humidity Alternating Test Chamber

XCH JSB Series is a temperature & humidity chamber with high and low temperature Chamber. Through the test and detection, so as to judge whether the performance of the product meets the design requirements for testing. Model: 100JSB-1000JSB TEMP Range: -40-150℃ Installed Power: AC220V±10% 50HZ Environment temperature: +5~35℃

lab incubator, constant temperature incubator, mildew incubator

Lab Mold Incubator 500L(0-60℃)

XCH-500MJ Mold incubator, also known as Mildew incubator. Equipped with UV germicidal lamp, you can choose humidification or no humidification (XCH-MJS series is equipped with humidification function). Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation. Model: XCH-500MJ Temp.Range: 0℃～60℃ Deviation: ±1.0℃ Capacity: 500L Environment Temperature: +5 ～ 35℃ Installed Power: AC220V±10% 50HZ

Biochemical Incubator

XCH-70LRH Biochemical Incubator uses the latest air duct system to achieve the best level of uniformity of temperature and humidity in different positions inside the chamber. The bod cooling incubator Polyurethane foam technology is adopted, good insulation, energy saving. Provides precise temperature control for reliable results in pharmaceutical, industrial testing, food, cosmetics, and microbiological research. LHR Series Biochemical Laboratory incubators is applied to scientific research and production departments such as environmental protection, sanitation and epidemic prevention, agricultural and livestock aquatic medicine detection and cell culture. Model: 70LRH Capacity: 70L TEMP: 0~60℃ Fluctuations: High TEMP ≤ ±0.5℃ ; Low TEMP ≤ ±1.0℃ Uniformity ≤ ±1.5℃ （@25℃） Installed Power: AC220V±10% 50HZ Environmental Temperature: +5~35℃

photostability chamber, temperature controlled chamber, Medicine Stability Chamber

Photostability Test Chamber XCH-500LTPS

XCH-500LTPS photostability chamber, is a temperature controlled chamber, equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 500LTPS TEMP Range: 2～30℃ Fluctuation: ＜±1℃ TEMP Deviation: ＜ ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

stability test chambers,stability chambers in pharmaceutical, Drug Stability Testing Chamber, Medicine Stability Chamber

Pharmaceutical stability test chambers XCH-520SD

The XCH-520SD medical stability testing chamber Medicine Stability Chamber, two boxes are independently controlled, climatic test, CSD series, A box has temperature, the three functions of humidity and light can be equipped with near-ultraviolet lamps to meet the requirements of the guidelines for the stability test of the 2020 edition of the Pharmacopoeia; Box B only controls and records. Model: XCH-520SD Temperature Range: 10~65℃ Temperature Fluctuation: ＜±0.5℃ Temperature deviation: ＜±1.0℃ Humidity Range: 20~95%RH Humidity deviation: ＜ ±3%RH Power: AC 220V±10% 50HZ Environment temperature: +5 ～ 35℃

Dispensary Fridge,pharmaceutical storage cabinets, pharmaceutical refrigerator, cheap pharmacy fridges

Pharmaceutical Vaccine Refrigerator XCH-500YC

XCH-500YC Pharmaceutical refrigerator vaccine storage fridge is used for storing medicines, reagent, vaccine etc.optional with humidity and data record system. The drug storage Refrigerator provides compressor overheat protection, Compressor overpressure protection, compressor overload protection and fan overheat protection. Model: 250YC-1000YC Temperature Control: Fluctuation ≤ ±2℃ , Uniformity ≤ 5.0℃；Humidity Control：35%~75%RH Environment temperature: 10~30℃，Environment humidity: 35%~75%RH Power: AC220V±10% 50HZ Optional: SMS alarm and data record system

Medical Incubator, Low Temperature test incubator, Biochemistry incubator

Low Temperature Test Biochemistry Medical Incubator

XCH-RC series Low-Temperature Test Medical Incubator, Adopt the latest structural design, select the original imported high quality parts and manufacturing process, ensure the long-term continuous operation of the equipment, stable and reliable performance, suitable for temperature sensitive medicine stability test and preservation. Model: 150RC~720RC Environment temperature: 5~35℃ Fluctuation: ±0.5℃ Deviation: ±1.0℃ Uniformity:±1.0℃

Heating Incubator,Constant Temperature Incubator,Constant climate chamber

Electric Heating Incubator 160L

XCH-9162DHP Electric Heating Incubator. Excellent temperature uniformity. Digital bacteriological incubator equipped with a special temperature controller, fast induction, small system error. The Electric Heating Incubator is widely used for bacteria culture, fermentation and constant temperature test in medical and health, pharmaceutical industry, biochemistry, agricultural science and other scientific research and industrial production departments. Model: XCH-9162DHP Temperature Fluctuation ≤ ±0.5℃ Temperature Uniformity ≤ ±1.5℃（@37℃） Timing Range: 1-9999min Power: AC 220V±10% 50HZ Environment temperature: +5 ～ 35℃ Optional: Printer or RS485 interface

lab incubator stability test chambers laboratory hot air oven laboratory electric drying oven Biochemical incubator Microbiological incubator Electric Heating incubator Laboratory Biochemical incubator Medical Incubator Medical grade refrigerator

Contact Now

Contact Now

Home

Products

High Temperature Chamber

High and Low Temperature Test Chamber

High And Low Temperature Humidity Alternating Test Chamber

High Temperature Constant Temperature Test Chamber