Photo Stability Test Chamber, Medicine Stability Chamber,

Strong Medicine Photostability Test Chamber 150TPS

XCH-150TPS medicine Photostability Test Chamber is equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled.

Model: 150TPS

TEMP Range: 15~50℃

Fluctuation: ＜±1℃

TEMP Deviation: ＜ ±2.0℃(SAME LEVEL)
Light Range: Visible light range: 100 ~ 8000LUX
Total illumination should not be less than 1.2 x 10^6Lux·hr
UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡
UV wavelength: NUV wavelength: 320 ~ 400nm;

Item no.:
150TPS-500TPS
Product origin:
China

request a quote

Product Overview

Strong Medicine Photo Stability Test Chamber

What is photo stability chamber? It is a advanced temperature controlled stability chambers for precise temperature control. FDA/ICH Approved. XCH stability test chamber can be equipped with near-ultraviolet lamps, meeting the requirements of the guidelines for the stability test of the 2020 edition of the Pharmacopoei. And widely used for research on the pharmaceutical industry,Medical industry,Biotechnology industry and other life science-related industries.

Key Features:

• Temperature Control: Temperature Fluctuation ≤ ±1.0℃，Temperature Deviation ≤ ±2.0℃（Same layer）

• Illumination Control: The total illumination is not less than 1.2×106 Lux·hr，Near ultraviolet energy is not less than 200w·hr/m2

• Light Source Design: Top light source design, the sample of different position of shelf has good uniformity of receiving light source irradiation

• Insulation material: Integral polyurethane foam technology, with good heat preservation and moisture retention performance

• Chamber Material: The liner is made of mirror stainless steel 304, no pollution source, easy to clean,the out shell is plastic sprayed steel plate

• Refrigerating System: The imported fully enclosed industrial compressor, long-life, low noise.

• Control System: The imported digital display illuminance controller,High control accuracy.

• Safety device: compressor overheat and overpressure overload protection, Fan overheat protection.

• Dual Protection: Equipped with independent overtemperature protection system, can automatically cut off the power supply

• Data Record: Equipped with data collection system conform to GMP requirements,Needle micro printer and USB output port as standard

• Meet a criterion: Meet ICHQ1B、Chinese Pharmacopoeia 2020 edition

• Installed Power: AC220V±10% 50HZ

• Environment temperature: +5~35℃

• SMS alarm: Optional.

Stability chamber specification:

MODEL	TEMP RANGE	CAPACITY(L)	INTERNAL DIMEN(mm) W×D×H	EXTERNAL DIMEN(mm) W×D×H	POWER(KW)	TRAY	SystemIllumination range	Remarks
XCH-150TPS	15～50℃	150	650×490×500	800×790×1250	1.0	1	Visible light: 100 ～ 8000Lux Near UV: 0.84 ～ 5w/m2	*1independent light source system 1printing storage system*
XCH-250TPS	15～50℃	250	600×500×830	760×870×1650	1.5	2		2independent light source system 2printing storage system
XCH-500TPS	15～50℃	500	680×680×1070	840×1050×1850	2.2	3		3*independent light source system Print and store 3 layers of data
XCH-250LTPS	2～30℃	250	600×500×830	760×870×1650	1.5	1	Visible light: 100 ～ 5000Lux Near UV: 0.84 ～ 1w/m	1independent light source system 1printing storage system
XCH-500LTPS	2～30℃	500	680×680×1070	840×1050×1850	2.2	2	Visible light: 100 ～ 5000Lux Near UV: 0.84 ～ 1w/m	2*independent light source system Print and store 2 layers of data

Advantages:

No maintenance.No pollution source
High sensitivity, low annual drift
High precision

Safety,with alarm system

Inquiry now

Contact Now

Please fill in correct email address and phone number, to make it sure for us to reach you. Thanks.

Tags :

Categories

Related Products

Photo Stability Chamber, Medicine Stability Chamber

250L Photostability Chamber Temperature Stability Chamber

XCH-250TPS photostability chamber is a temperature controlled chamber, equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 250TPS TEMP Range: 15~50℃ Fluctuation: ＜±1℃ TEMP Deviation: ＜ ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

Photostability Test Chamber, Temperature Stability Chamber XCH-500TPS

XCH-500TPS temperature stability chamber, is a quality Photostability Chamber, equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 500TPS TEMP Range: 15~50℃ Fluctuation: ＜±1℃ TEMP Deviation: ＜ ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

Photostability Test Chamber XCH-250LTPS

XCH-250LTPS medicine Photostability Chamber, temperature controlled chamber is equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 250LTPS TEMP Range: 2～30℃ Fluctuation: ＜±1℃ TEMP Deviation: ＜ ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

photostability chamber, temperature controlled chamber, Medicine Stability Chamber

Photostability Test Chamber XCH-500LTPS

XCH-500LTPS photostability chamber, is a temperature controlled chamber, equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 500LTPS TEMP Range: 2～30℃ Fluctuation: ＜±1℃ TEMP Deviation: ＜ ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

Walk-In Stability Chamber, Walk-In Stability test Chamber

Walk-in Constant Temperature and Humidity Stability Chamber

The XCH-8000SD Series Walk-In Stability test Chamber, newly airway system designed achieves uniform of temperature and humidity form different parts inside the chamber. The inner wall and duct plate are made of stainless steel 304. Observation window of hollow tempered glass with electrothermal film. Temperature Range: 20~ 45℃ Temperature Fluctuation：≤ ±0.5℃ Temperature Deviation：≤ ±1.0℃ Humidity Range：20/40～80%RH(or 20～80%RH）); Humidity Deviation：≤ ±3.0%RH Test Points Optional：40℃ /75%RH、25℃ /60%RH、30℃ /65%RH （40℃ /25%RH、25℃ /40%RH、25℃ /60%RH） Low Temperature Laboratory: 2 ～ 8℃

lab incubator, constant temperature incubator, mildew incubator

Lab Mold Incubator 500L(0-60℃)

XCH-500MJ Mold incubator, also known as Mildew incubator. Equipped with UV germicidal lamp, you can choose humidification or no humidification (XCH-MJS series is equipped with humidification function). Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation. Model: XCH-500MJ Temp.Range: 0℃～60℃ Deviation: ±1.0℃ Capacity: 500L Environment Temperature: +5 ～ 35℃ Installed Power: AC220V±10% 50HZ

Laboratory incubator,Biochemical incubator,Refrigerated incubator,iochemical Incubator,BOD incubator,incubator lab equipment

Lab Biochemical Incubator 250L

XCH-250LRH Biochemical Incubator uses the latest air duct system to achieve the best level of uniformity of temperature and humidity in different positions inside the chamber. The bod cooling incubator Polyurethane foam technology is adopted, good insulation, energy saving. Provides precise temperature control for reliable results in pharmaceutical, industrial testing, food, cosmetics, and microbiological research. LHR Series Biochemical Laboratory incubators is applied to scientific research and production departments such as environmental protection, sanitation and epidemic prevention, agricultural and livestock aquatic medicine detection and cell culture. Model: 250LRH Capacity: 250L TEMP: 0~60℃ Fluctuations: High TEMP ≤ ±0.5℃; Low TEMP ≤ ±1.0℃ Uniformity ≤ ±1.5℃ （@25℃） Installed Power: AC220V±10% 50HZ Environmental Temperature: +5~35℃

Medicine Storage Refrigerator, Storage Refrigerator for Vaccines, Medical Refrigerator, medical refrigerator for vaccines

Medicine Storage Refrigerator 2000L

XCH-2000MR series Medicine Storage Refrigerator for vaccines is mainly used to save drugs, reagents, vaccine storage fridge, biological products and blood products, etc., temperature range is 2-8 ℃, the cooling system, digital temperature control system, air circulation system, temperature sensor, etc. Model: XCH-2000MR Temperature Control: Temperature Fluctuation ≤ ±1℃ ,Temperature Deviation ≤ ±2.0℃ Installed Power: AC220V±10% 50HZ Environment temperature: +5~35℃ Optional: Data storage and printing.SMS Alarm(With power off alarm),Multiple devices can share one mobile card

lab incubator, BOD incubator, mold incubator

150L - 250L Laboratory Mold Incubator

XCH-150MJS Mold incubator, Humidity Equipped. 150L capicity, Temperature Range 10-60℃. Equipped with UV germicidal lamp. Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation. Model: XCH-150MJS Capacity: 150L Temp.Range: 10℃～60℃ Temperature Fluctuation: ±2.0℃ Humidity Range: 50-90%RH Humidity Fluctuation: ±5%RH Environment Temperature: +5 ～ 35℃ Installed Power: AC220V±10% 50HZ

Medicine Stability Chamber Temperature humidity chamber Stability chambers in pharmaceutical Photostability Chamber Environmental test chamber Stability chamber for pharmaceutical Walk-In Stability Chamber Walk-In chamber Stability test chambers constant temperature chamber

Contact Now

Contact Now

Home

Products

Photostability Chamber 150-500L

Strong Medicine Photostability Test Chamber 150TPS

Photostability Test Chamber, Temperature Stability Chamber XCH-500TPS