Photo Stability Test Chamber, Medicine Stability Chamber,

Photostability Test Chamber XCH-250LTPS

XCH-250LTPS medicine Photostability Chamber, temperature controlled chamber is equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled.

Model: 250LTPS

TEMP Range: 2～30℃

Fluctuation: ＜±1℃

TEMP Deviation: ＜ ±2.0℃(SAME LEVEL)
Light Range: Visible light range: 100 ~ 8000LUX
Total illumination should not be less than 1.2 x 10^6Lux·hr
UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡
UV wavelength: NUV wavelength: 320 ~ 400nm;

Item no.:
150TPS-500TPS
Product origin:
China

request a quote

Product Overview

Photostability Test Chamber XCH-250LTPS

250L Photostability Test Chamber, a advanced humidity controlled stability chambers for precise temperature control. It is characterized by ideal light, UV, temperature, and humidity distribution and can therefore guarantee a completely reproducible climate, UV and light conditions. ICH Approved.

Key Features:

• Temperature Control: Temperature Fluctuation ≤ ±1.0℃，Temperature Deviation ≤ ±2.0℃（Same layer）

• Illumination Control: The total illumination is not less than 1.2×106 Lux·hr，Near ultraviolet energy is not less than 200w·hr/m2

• Light Source Design: Top light source design, the sample of different position of shelf has good uniformity of receiving light source irradiation

• Insulation material: Integral polyurethane foam technology, with good heat preservation and moisture retention performance

• Chamber Material: The liner is made of mirror stainless steel 304, no pollution source, easy to clean,the out shell is plastic sprayed steel plate

• Refrigerating System: The imported fully enclosed industrial compressor, long-life, low noise.

• Control System: The imported digital display illuminance controller,High control accuracy.

• Safety device: compressor overheat and overpressure overload protection, Fan overheat protection.

• Dual Protection: Equipped with independent overtemperature protection system, can automatically cut off the power supply

• Data Record: Equipped with data collection system conform to GMP requirements,Needle micro printer and USB output port as standard

• Meet a criterion: Meet ICHQ1B、Chinese Pharmacopoeia 2020 edition

• Installed Power: AC220V±10% 50HZ

• Environment temperature: +5~35℃

• SMS alarm: Optional.

Stability chamber specification:

MODEL	TEMP RANGE	CAPACITY(L)	INTERNAL DIMEN(mm) W×D×H	EXTERNAL DIMEN(mm) W×D×H	POWER(KW)	TRAY	SystemIllumination range	Remarks
XCH-150TPS	15～50℃	150	650×490×500	800×790×1250	1.0	1	Visible light: 100 ～ 8000Lux Near UV: 0.84 ～ 5w/m2	1independent light source system 1printing storage system
XCH-250TPS	15～50℃	250	600×500×830	760×870×1650	1.5	2		2independent light source system 2printing storage system
XCH-500TPS	15～50℃	500	680×680×1070	840×1050×1850	2.2	3		3*independent light source system Print and store 3 layers of data
XCH-250LTPS	2～30℃	250	600×500×830	760×870×1650	1.5	1	Visible light: 100 ～ 5000Lux Near UV: 0.84 ～ 1w/m	*1independent light source system 1printing storage system*
XCH-500LTPS	2～30℃	500	680×680×1070	840×1050×1850	2.2	2	Visible light: 100 ～ 5000Lux Near UV: 0.84 ～ 1w/m	2*independent light source system Print and store 2 layers of data

Advantages:

No maintenance.No pollution source
High sensitivity, low annual drift
High precision

Safety,with alarm system

Inquiry now

Contact Now

Please fill in correct email address and phone number, to make it sure for us to reach you. Thanks.

Tags :

Categories

Related Products

Photo Stability Chamber, Medicine Stability Chamber

250L Photostability Chamber Temperature Stability Chamber

XCH-250TPS photostability chamber is a temperature controlled chamber, equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 250TPS TEMP Range: 15~50℃ Fluctuation: ＜±1℃ TEMP Deviation: ＜ ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

Strong Medicine Photostability Test Chamber 150TPS

XCH-150TPS medicine Photostability Test Chamber is equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 150TPS TEMP Range: 15~50℃ Fluctuation: ＜±1℃ TEMP Deviation: ＜ ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

Photostability Test Chamber, Temperature Stability Chamber XCH-500TPS

XCH-500TPS temperature stability chamber, is a quality Photostability Chamber, equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 500TPS TEMP Range: 15~50℃ Fluctuation: ＜±1℃ TEMP Deviation: ＜ ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

photostability chamber, temperature controlled chamber, Medicine Stability Chamber

Photostability Test Chamber XCH-500LTPS

XCH-500LTPS photostability chamber, is a temperature controlled chamber, equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 500LTPS TEMP Range: 2～30℃ Fluctuation: ＜±1℃ TEMP Deviation: ＜ ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

High And Low Temperature Humidity Alternating Test Chamber

XCH JSB Series is a temperature & humidity chamber with high and low temperature Chamber. Through the test and detection, so as to judge whether the performance of the product meets the design requirements for testing. Model: 100JSB-1000JSB TEMP Range: -40-150℃ Installed Power: AC220V±10% 50HZ Environment temperature: +5~35℃

lab incubator, BOD incubator, mold incubator

Lab Mold Incubator 250L(with humidity control)

XCH-250MJS Mold incubator, Humidity Equipped. 150L capicity, Temperature Range 10-60℃. Equipped with UV germicidal lamp. Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation. Model: XCH-250MJS Capacity: 250L Temp.Range: 10℃～60℃ Temperature Fluctuation: ±2.0℃ Humidity Range: 50-90%RH Humidity Fluctuation: ±5%RH Environment Temperature: +5 ～ 35℃ Installed Power: AC220V±10% 50HZ

Comprehensive Drug Test Chamber, temperature stability chamber, Medicine Stability Chamber

Multi-chamber Temp/RH Stability Chamber XCH-830SD

XCH-830SD Multi-chamber Temp/RH Stability Chamber adopts quality imported components and manufacturing process, with stable and reliable performance, independent control and climatic test of three boxes and temperature and humidity control of A, B and C boxes. Model: XCH-830SD TEMP Range: 15~65℃ Fluctuation: ＜±0.5℃ TEMP Deviation: ＜ ±1.0℃ Humidity Range: 20 ～ 95% Humidity Deviation:＜ ±3%RH Capacity: 430L~830L Environment temperature: +5 ～ 35℃

Strong Medicine Photostability Test Chamber 150TPS

Walk-In Stability Chamber, Walk-In Stability test Chamber

Walk-in Stability Test Chamber 20000SD

The XCH-20000SD walk in chamber, newly airway system designed achieves uniform of temperature and humidity form different parts inside the chamber. The inner wall and duct plate are made of stainless steel 304. Observation window of hollow tempered glass with electrothermal film. Temperature Range: 20~ 45℃ Temperature Fluctuation：≤ ±0.5℃ Temperature Deviation：≤ ±1.0℃ Humidity Range：40～80%RH(or 20～80%RH）); Humidity Deviation：≤ ±3.0%RH Test Points Optional：40℃ /75%RH、25℃ /60%RH、30℃ /65%RH （40℃ /25%RH、25℃ /40%RH、25℃ /60%RH） Low Temperature Laboratory: 2 ～ 8℃

Medicine Stability Chamber Temperature humidity chamber Stability chambers in pharmaceutical Photostability Chamber Environmental test chamber Stability chamber for pharmaceutical Walk-In Stability Chamber Walk-In chamber Stability test chambers constant temperature chamber

Contact Now

Contact Now

Home

Products

Photostability Chamber 150-500L

Photostability Test Chamber XCH-250LTPS

250L Photostability Chamber Temperature Stability Chamber

Photostability Test Chamber, Temperature Stability Chamber XCH-500TPS