The single door low temperature stability chamber, using advanced high-quality components and manufacturing technology, stable and reliable performance, suitable for GMP certified users. Creates a temperature, humidity, light environment for low temperature test chamberevaluation. Suitable for accelerated testing, long-term testing, wet test, and strong light irradiation test.

Model: XCH-150CSD

Capacity: 150L

TEMP Range: 15~65℃

Fluctuation: ＜±0.5℃
Deviation:＜±1.0℃
Humidity Range: 20~95%
Fluctuation: ＜±3.0%RH
Deviation:＜±3.0%RH
Environment temperature: +5 ～ 35℃

XCH JSB Series is a temperature & humidity chamber with high and low temperature Chamber. Through the test and detection, so as to judge whether the performance of the product meets the design requirements for testing.

Model: 100JSB-1000JSB

TEMP Range: -40-150℃

Installed Power: AC220V±10% 50HZ

Environment temperature: +5~35℃

XCH-150MJ Mold incubator, also known as Mildew incubator. Equipped with UV germicidal lamp, you can choose humidification or no humidification (XCH-MJS series is equipped with humidification function).

Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation.

Model: 150MJ

Temp.Range: 0℃～60℃

Deviation: ±1.0℃

Capacity: 150L

Environment Temperature: +5 ～ 35℃

Installed Power: AC220V±10% 50HZ

XCH-70LRH Biochemical Incubator uses the latest air duct system to achieve the best level of uniformity of temperature and humidity in different positions inside the chamber. The bod cooling incubator Polyurethane foam technology is adopted, good insulation, energy saving. Provides precise temperature control for reliable results in pharmaceutical, industrial testing, food, cosmetics, and microbiological research.

LHR Series Biochemical Laboratory incubators is applied to scientific research and production departments such as environmental protection, sanitation and epidemic prevention, agricultural and livestock aquatic medicine detection and cell culture.

Model: 70LRH
Capacity: 70L
TEMP: 0~60℃
Fluctuations: High TEMP ≤ ±0.5℃ ; Low TEMP ≤ ±1.0℃
Uniformity ≤ ±1.5℃ （@25℃）
Installed Power: AC220V±10% 50HZ
Environmental Temperature: +5~35℃

XCH-800MR series Medicine Storage Refrigerator for vaccines is mainly used to save drugs, reagents, vaccine storage fridge, biological products and blood products, etc., temperature range is 2-8 ℃, the cooling system, digital temperature control system, air circulation system, temperature sensor, etc.

Model: XCH-800MR

Temperature Control: Temperature Fluctuation ≤ ±1℃ ,Temperature Deviation ≤ ±2.0℃
Installed Power: AC220V±10% 50HZ
Environment temperature: +5~35℃
Optional: Data storage and printing.SMS Alarm(With power off alarm),Multiple devices can share one mobile card

XCH-250MR series Medicine Storage Refrigerator is mainly used to save drugs, reagents, vaccines, biological products and blood products, etc., The medical refrigerator for vaccines temperature range is 2-8 ℃, the cooling system, digital temperature control system, air circulation system, temperature sensor, etc.

Model: XCH-250MR

Temperature Control: Temperature Fluctuation ≤ ±1℃ ,Temperature Deviation ≤ ±2.0℃
Installed Power: AC220V±10% 50HZ
Environment temperature: +5~35℃
Optional: Data storage and printin S Alarm(With power off alarm),Multiple devices can share one mobile card.

XCH-250YC Pharmaceutical refrigerator vaccine storage fridge is used for storing medicines, reagent, vaccine etc.optional with humidity and data record system. The drug storage Refrigerator provides compressor overheat protection, Compressor overpressure protection, compressor overload protection and fan overheat protection.

Model: 250YC-1000YC

Temperature Control: Fluctuation ≤ ±2℃ , Uniformity ≤ 5.0℃；Humidity Control：35%~75%RH
Environment temperature: 10~30℃，Environment humidity: 35%~75%RH
Power: AC220V±10% 50HZ
Optional: SMS alarm and data record system

The medical refrigerator is mainly used to store medicines, reagents, vaccines, biological products, blood products, etc., with a temperature range of 2-8°C, professional medical grade refrigerator.

Model: 250BC~2000BC

Temperature Control: Temperature Fluctuation ≤ ±1℃ ,Temperature Deviation ≤ ±2.0℃
Installed Power: AC220V±10% 50HZ
Environment temperature: +5~35℃
Optional: Data storage and printing.SMS Alarm(With power off alarm)

XCH-150FC Ultra Low Temperature medical grade freezer inner tank is made of full-mirror stainless steel 304, which is free of pollution sources and easy to clean; it has an alarm system that meets GMP requirements; it has a data acquisition system that meets GMP requirements. The ultra low lab freezer is equipped with a needle printer and U disk storage as standard. It is suitable for stability test and storage of temperature-sensitive drugs.

Model: 150FC~250FC

Temperature Range: -25℃ ～ -15℃

Temperature Control:

Temperature Fluctuation ≤ ±0.5℃

Temperature Deviation ＜ ±2.0℃
Installed Power: AC220V±10% 50HZ
Environment temperature: +5~35℃
Optional: SMS alarm and data storage system

The multi-chamber Stability Chamber, Temp Only or Temp/RH. Adopts quality imported components and manufacturing process, with stable and reliable performance, independent control and climatic test of three boxes and temperature and humidity control of A, B and C boxes.

Model: XCH-430SD

TEMP Range: 15~65℃

Fluctuation: ＜±0.5℃

TEMP Deviation: ＜ ±1.0℃
Humidity Range: 20 ～ 95%
Humidity Deviation:＜ ±3%RH
Capacity: 430L~830L
Environment temperature: +5 ～ 35℃

The XCH-320SD medical stability testing chamber Medicine Stability Chamber, two boxes are independently controlled, climatic test, CSD series, A box has temperature, the three functions of humidity and light can be equipped with near-ultraviolet lamps to meet the requirements of the guidelines for the stability test of the 2020 edition of the Pharmacopoeia; Box B only controls and records.

Model: XCH-320SD

Temperature Range: 10~65℃

Temperature Fluctuation: ＜±0.5℃

Temperature deviation: ＜±1.0℃
Humidity Range: 20~95%RH
Humidity deviation:  ＜ ±3%RH
Power: AC 220V±10% 50HZ
Environment temperature: +5 ～ 35℃

The XCH-800SD Double Door Medicine Drug Stability Environmental Testing Chamber, using imported high-quality components and manufacturing technology, with Medicine Stability Chamber stable and reliable performance, suitable GMP certified users

Model: XCH-800SD

TEMP Range: 10~65℃

TEMP Fluctuation: ＜±0.5℃

TEMP Deviation: ＜ ±1.0℃
Humidity Range: 20 ～ 95%
Humidity Deviation:＜ ±3%RH
Capacity: 800L~3000L
Environment temperature: +5 ～ 35℃

This 150L temperature and humidity test chamber, high quality stability chamber, using advanced high-quality components and manufacturing technology, stable and reliable performance, suitable for GMP certified users. Creates a temperature, humidity, light environment for drug, medicine and other products fields stability evaluation. Suitable for accelerated testing, long-term testing, wet test, climatic test and strong light irradiation test.

Model: XCH-150SD

Capacity:150L

XCH-150TPS medicine Photostability Test Chamber is equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled.

Model: 150TPS

TEMP Range: 15~50℃

Fluctuation: ＜±1℃

TEMP Deviation: ＜ ±2.0℃(SAME LEVEL)
Light Range: Visible light range: 100 ~ 8000LUX
Total illumination should not be less than 1.2 x 10^6Lux·hr
UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡
UV wavelength: NUV wavelength: 320 ~ 400nm;

Temperature Range: 20~ 45℃

Temperature Fluctuation：≤ ±0.5℃

Temperature Deviation：≤ ±1.0℃

Humidity Range：20/40～80%RH(or 20～80%RH）);

Humidity Deviation：≤ ±3.0%RH

Test Points Optional：40℃ /75%RH、25℃ /60%RH、30℃ /65%RH

（40℃ /25%RH、25℃ /40%RH、25℃ /60%RH）

Low Temperature Laboratory: 2 ～ 8℃

XCH-800LRH Biochemical Incubator & Cooling Incubatoruses the latest air duct system to achieve the best level of uniformity of temperature and humidity in different positions inside the chamber. The bod cooling incubator Polyurethane foam technology is adopted, good insulation, energy saving. Provides precise temperature control for reliable results in pharmaceutical, industrial testing, food, cosmetics, and microbiological research.

LHR Series Biochemical Laboratory incubators is applied to scientific research and production departments such as environmental protection, sanitation and epidemic prevention, agricultural and livestock aquatic medicine detection and cell culture.

Model:800LRH
Capacity:800L
TEMP:0~60℃
Fluctuations:High TEMP ≤ ±0.5℃; Low TEMP ≤ ±1.0℃
Uniformity≤ ±1.5℃ （@25℃）
Installed Power:AC220V±10% 50HZ
Environmental Temperature:+5~35℃

Multi-chamber Temprature Humidity Stability Chambers in Pharmaceutical adopts quality imported components and manufacturing process, with stable and reliable performance, independent control and climatic test of three boxes and temperature and humidity control of A, B and C boxes.

Model: XCH-430CSD

TEMP Range: 15~65℃

Fluctuation: ＜±0.5℃

TEMP Deviation: ＜ ±1.0℃
Humidity Range: 20 ～ 95%
Humidity Deviation:＜ ±3%RH
Capacity: 430L~830L
Environment temperature: +5 ～ 35℃

XCH-500TPS temperature stability chamber, is a quality Photostability Chamber, equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled.

Model: 500TPS

TEMP Range: 15~50℃

Fluctuation: ＜±1℃

TEMP Deviation: ＜ ±2.0℃(SAME LEVEL)
Light Range: Visible light range: 100 ~ 8000LUX
Total illumination should not be less than 1.2 x 10^6Lux·hr
UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡
UV wavelength: NUV wavelength: 320 ~ 400nm;

XCH-250LTPS medicine Photostability Chamber, temperature controlled chamber is equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled.

Model: 250LTPS

TEMP Range: 2～30℃

Fluctuation: ＜±1℃

TEMP Deviation: ＜ ±2.0℃(SAME LEVEL)
Light Range: Visible light range: 100 ~ 8000LUX
Total illumination should not be less than 1.2 x 10^6Lux·hr
UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡
UV wavelength: NUV wavelength: 320 ~ 400nm;

XCH-500LTPS photostability chamber, is a temperature controlled chamber, equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled.

Model: 500LTPS

TEMP Range: 2～30℃

Fluctuation: ＜±1℃

TEMP Deviation: ＜ ±2.0℃(SAME LEVEL)
Light Range: Visible light range: 100 ~ 8000LUX
Total illumination should not be less than 1.2 x 10^6Lux·hr
UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡
UV wavelength: NUV wavelength: 320 ~ 400nm;

Model:XCH-15000SD

Temperature Range:20~45℃

Temperature Range: 20~ 45℃

Temperature Fluctuation：≤ ±0.5℃

Temperature Deviation：≤ ±1.0℃

Humidity Range：40～80%RH(or 20～80%RH）);

Humidity Deviation：≤ ±3.0%RH

Test Points Optional：40℃ /75%RH、25℃ /60%RH、30℃ /65%RH

（40℃ /25%RH、25℃ /40%RH、25℃ /60%RH）

Low Temperature Laboratory: 2 ～ 8℃

Temperature Range: 20~ 45℃

Temperature Fluctuation：≤ ±0.5℃

Temperature Deviation：≤ ±1.0℃

Humidity Range：40～80%RH(or 20～80%RH）);

Humidity Deviation：≤ ±3.0%RH

Test Points Optional：40℃ /75%RH、25℃ /60%RH、30℃ /65%RH

（40℃ /25%RH、25℃ /40%RH、25℃ /60%RH）

Low Temperature Laboratory: 2 ～ 8℃

XCH-250FC Ultra Low Temperature medical grade freezer inner tank is made of full-mirror stainless steel 304, which is free of pollution sources and easy to clean; it has an alarm system that meets GMP requirements; it has a data acquisition system that meets GMP requirements. The ultra low lab freezer is equipped with a needle printer and U disk storage as standard. It is suitable for stability test and storage of temperature-sensitive drugs.

Model: 150FC~250FC

Temperature Range: -25℃ ～ -15℃

Temperature Control:

Temperature Fluctuation ≤ ±0.5℃

Temperature Deviation ＜ ±2.0℃
Installed Power: AC220V±10% 50HZ
Environment temperature: +5~35℃
Optional: SMS alarm and data storage system

XCH-400YC Pharmaceutical refrigerator vaccine storage fridge is used for storing medicines, reagent, vaccine etc.optional with humidity and data record system. The drug storage Refrigerator provides compressor overheat protection, Compressor overpressure protection, compressor overload protection and fan overheat protection.

Model: 250YC-1000YC

Temperature Control: Fluctuation ≤ ±2℃ , Uniformity ≤ 5.0℃；Humidity Control：35%~75%RH
Environment temperature: 10~30℃，Environment humidity: 35%~75%RH
Power: AC220V±10% 50HZ
Optional: SMS alarm and data record system

XCH-500YC Pharmaceutical refrigerator vaccine storage fridge is used for storing medicines, reagent, vaccine etc.optional with humidity and data record system. The drug storage Refrigerator provides compressor overheat protection, Compressor overpressure protection, compressor overload protection and fan overheat protection.

Model: 250YC-1000YC

Temperature Control: Fluctuation ≤ ±2℃ , Uniformity ≤ 5.0℃；Humidity Control：35%~75%RH
Environment temperature: 10~30℃，Environment humidity: 35%~75%RH
Power: AC220V±10% 50HZ
Optional: SMS alarm and data record system

XCH-800YC Pharmaceutical refrigerator vaccine storage fridge is used for storing medicines, reagent, vaccine etc.optional with humidity and data record system. The drug storage Refrigerator provides compressor overheat protection, Compressor overpressure protection, compressor overload protection and fan overheat protection.

Model: 250YC-1000YC

Temperature Control: Fluctuation ≤ ±2℃ , Uniformity ≤ 5.0℃；Humidity Control：35%~75%RH
Environment temperature: 10~30℃，Environment humidity: 35%~75%RH
Power: AC220V±10% 50HZ
Optional: SMS alarm and data record system

XCH-1000YC Pharmaceutical refrigerator vaccine storage fridge is used for storing medicines, reagent, vaccine etc.optional with humidity and data record system. The drug storage Refrigerator provides compressor overheat protection, Compressor overpressure protection, compressor overload protection and fan overheat protection.

Model: 250YC-1000YC

Temperature Control: Fluctuation ≤ ±2℃ , Uniformity ≤ 5.0℃；Humidity Control：35%~75%RH
Environment temperature: 10~30℃，Environment humidity: 35%~75%RH
Power: AC220V±10% 50HZ
Optional: SMS alarm and data record system

XCH-150MJS Mold incubator, Humidity Equipped. 150L capicity, Temperature Range 10-60℃. Equipped with UV germicidal lamp.

Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation.

Model: XCH-150MJS

Capacity: 150L

Temp.Range: 10℃～60℃ Temperature Fluctuation: ±2.0℃

Humidity Range: 50-90%RH Humidity Fluctuation: ±5%RH

Environment Temperature: +5 ～ 35℃

Installed Power: AC220V±10% 50HZ

XCH-250TPS Photostability Test Chamber is a temperature controlled chamber, equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled.

Model: 250TPS

TEMP Range: 15~50℃

Fluctuation: ＜±1℃

TEMP Deviation: ＜ ±2.0℃(SAME LEVEL)
Light Range: Visible light range: 100 ~ 8000LUX
Total illumination should not be less than 1.2 x 10^6Lux·hr
UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡
UV wavelength: NUV wavelength: 320 ~ 400nm;

The XCH-320SD Stability Chambers in Pharmaceutical, two boxes are independently controlled, climatic test, CSD series, A box has temperature, the three functions of humidity and light can be equipped with near-ultraviolet lamps to meet the requirements of the guidelines for the stability test of the 2020 edition of the Pharmacopoeia; Box B only controls and records.

Model: XCH-320SD

Temperature Range: 10~65℃

Temperature Fluctuation: ＜±0.5℃

Temperature deviation: ＜±1.0℃
Humidity Range: 20~95%RH
Humidity deviation:  ＜ ±3%RH
Power: AC 220V±10% 50HZ
Environment temperature: +5 ～ 35℃

As a professional walk-in stability chamber manufacturer, we supply walk-in stability chamber for medicine storage and Testing, and test method refer to GB/T 10586-2006, JJF1101-2003 environmental test equipment temperature and humidity calibration specification for technical conditions of hot and humid test chamber.

XCH-400MR series Medicine Storage Refrigerator is mainly used to save drugs, reagents, vaccines, biological products and blood products, etc., The medical refrigerator for vaccines temperature range is 2-8 ℃, the cooling system, digital temperature control system, air circulation system, temperature sensor, etc.

Model: XCH-400MR

Temperature Control: Temperature Fluctuation ≤ ±1℃ ,Temperature Deviation ≤ ±2.0℃
Installed Power: AC220V±10% 50HZ
Environment temperature: +5~35℃
Optional: Data storage and printin S Alarm(With power off alarm),Multiple devices can share one mobile card.

XCH-500MR series Medicine Storage Refrigerator is mainly used to save drugs, reagents, vaccines, biological products and blood products, etc., The medical refrigerator for vaccines temperature range is 2-8 ℃, the cooling system, digital temperature control system, air circulation system, temperature sensor, etc.

Model: XCH-500MR

Temperature Control: Temperature Fluctuation ≤ ±1℃ ,Temperature Deviation ≤ ±2.0℃
Installed Power: AC220V±10% 50HZ
Environment temperature: +5~35℃
Optional: Data storage and printin S Alarm(With power off alarm),Multiple devices can share one mobile card.

XCH-1000MR series Medicine Storage Refrigerator for vaccines is mainly used to save drugs, reagents, vaccine storage fridge, biological products and blood products, etc., temperature range is 2-8 ℃, the cooling system, digital temperature control system, air circulation system, temperature sensor, etc.

Model: XCH-1000MR

Temperature Control: Temperature Fluctuation ≤ ±1℃ ,Temperature Deviation ≤ ±2.0℃
Installed Power: AC220V±10% 50HZ
Environment temperature: +5~35℃
Optional: Data storage and printing.SMS Alarm(With power off alarm),Multiple devices can share one mobile card

XCH-2000MR series Medicine Storage Refrigerator for vaccines is mainly used to save drugs, reagents, vaccine storage fridge, biological products and blood products, etc., temperature range is 2-8 ℃, the cooling system, digital temperature control system, air circulation system, temperature sensor, etc.

Model: XCH-2000MR

Temperature Control: Temperature Fluctuation ≤ ±1℃ ,Temperature Deviation ≤ ±2.0℃
Installed Power: AC220V±10% 50HZ
Environment temperature: +5~35℃
Optional: Data storage and printing.SMS Alarm(With power off alarm),Multiple devices can share one mobile card

The XCH-1000SD Double Door Medicine Drug Stability Environmental Testing Chamber, using imported high-quality components and manufacturing technology, with Medicine Stability Chamber stable and reliable performance, suitable GMP certified users

Model: XCH-1000SD

TEMP Range: 10~65℃

TEMP Fluctuation: ＜±0.5℃

TEMP Deviation: ＜ ±1.0℃
Humidity Range: 20 ～ 95%
Humidity Deviation:＜ ±3%RH
Capacity: 800L~3000L
Environment temperature: +5 ～ 35℃

The single door low temperature stability test chamber, using advanced high-quality components and manufacturing technology, stable and reliable performance, suitable for GMP certified users. Creates a temperature, humidity, light environment for low temperature stability test chamber evaluation. Suitable for accelerated testing, long-term testing, wet test, and strong light irradiation test.

Model: XCH-250CSD

Capacity: 250L

TEMP Range: 15~65℃

Fluctuation: ＜±0.5℃
Deviation:＜±1.0℃
Humidity Range: 20~95%
Fluctuation: ＜±3.0%RH
Deviation:＜±3.0%RH
Environment temperature: +5 ～ 35℃

The single door low temperature stability chamber, using advanced high-quality components and manufacturing technology, stable and reliable performance, suitable for GMP certified users. Creates a temperature, humidity, light environment for low temperature stability test chamber evaluation. Suitable for accelerated testing, long-term testing, wet test, and strong light irradiation test.

Model: XCH-400CSD

Capacity: 400L

TEMP Range: 15~65℃

Fluctuation: ＜±0.5℃
Deviation:＜±1.0℃
Humidity Range: 20~95%
Fluctuation: ＜±3.0%RH
Deviation:＜±3.0%RH
Environment temperature: +5 ～ 35℃

The single door low temperature ICH stability chamber, using advanced high-quality components and manufacturing technology, stable and reliable performance, suitable for GMP certified users. Creates a temperature, humidity, light environment for low temperature ICH stability test chamber evaluation. Suitable for accelerated testing, long-term testing, wet test, and strong light irradiation test.

Model: XCH-500CSD

Capacity: 500L

TEMP Range: 15~65℃

Fluctuation: ＜±0.5℃
Deviation:＜±1.0℃
Humidity Range: 20~95%
Fluctuation: ＜±3.0%RH
Deviation:＜±3.0%RH
Environment temperature: +5 ～ 35℃

This 250L climatic test chamber, adopt temperature and humidity controlled, is a ideal stability test chamber, using advanced high-quality components and manufacturing technology, stable and reliable performance, suitable for GMP certified users. Creates a temperature, humidity, light environment for drug stability evaluation. Suitable for accelerated testing, long-term testing, wet test, climatic test and strong light irradiation test.

Model: XCH-250SD

Capacity: 250L

The XCH-400SD single door medicine drug stability environmental testing chamber, using advanced high-quality components and manufacturing technology, stable and reliable performance, suitable for GMP certified users. Creates a temperature, humidity, light environment for drug stability evaluation. Suitable for accelerated testing, long-term testing, wet test, climatic test and strong light irradiation test.

Model: XCH-400SD

Capacity: 400L

The XCH-500SD single door medicine drug environmental stability testing chamber, using advanced high-quality components and manufacturing technology, stable and reliable performance, suitable for GMP certified users. Creates a temperature, humidity, light environment for drug stability evaluation. Suitable for accelerated testing, long-term testing, wet test, climatic test and strong light irradiation test.

Model: XCH-500SD

Capacity: 500L

The XCH-2000SD Double Door Medicine Drug Stability Environmental Testing Chamber, using imported high-quality components and manufacturing technology, with Medicine Stability Chamber stable and reliable performance, suitable GMP certified users

Model: XCH-2000SD

TEMP Range: 10~65℃

TEMP Fluctuation: ＜±0.5℃

TEMP Deviation: ＜ ±1.0℃
Humidity Range: 20 ～ 95%
Humidity Deviation:＜ ±3%RH
Capacity: 800L~3000L
Environment temperature: +5 ～ 35℃

The XCH-3000SD Double Door Medicine Drug Stability Environmental Testing Chamber, using imported high-quality components and manufacturing technology, with Medicine Stability Chamber stable and reliable performance, suitable GMP certified users

Model: XCH-3000SD

TEMP Range: 10~65℃

TEMP Fluctuation: ＜±0.5℃

TEMP Deviation: ＜ ±1.0℃
Humidity Range: 20 ～ 95%
Humidity Deviation:＜ ±3%RH
Capacity: 800L~3000L
Environment temperature: +5 ～ 35℃

XCH-830SD Multi-chamber Temp/RH Stability Chamber adopts quality imported components and manufacturing process, with stable and reliable performance, independent control and climatic test of three boxes and temperature and humidity control of A, B and C boxes.

Model: XCH-830SD

TEMP Range: 15~65℃

Fluctuation: ＜±0.5℃

TEMP Deviation: ＜ ±1.0℃
Humidity Range: 20 ～ 95%
Humidity Deviation:＜ ±3%RH
Capacity: 430L~830L
Environment temperature: +5 ～ 35℃

XCH-830CSD Multi-chamber Temp/RH Stability Chamber adopts quality imported components and manufacturing process, with stable and reliable performance, independent control and climatic test of three boxes and temperature and humidity control of A, B and C boxes.

Model: XCH-830CSD

TEMP Range: 15~65℃

Fluctuation: ＜±0.5℃

TEMP Deviation: ＜ ±1.0℃
Humidity Range: 20 ～ 95%
Humidity Deviation:＜ ±3%RH
Capacity: 430L~830L
Environment temperature: +5 ～ 35℃

XCH-430CSD Multi-chamber Temp/RH Stability Chamber adopts quality imported components and manufacturing process, with stable and reliable performance, independent control and climatic test of three boxes and temperature and humidity control of A, B and C boxes.

Model: XCH-430CSD

TEMP Range: 15~65℃

Fluctuation: ＜±0.5℃

TEMP Deviation: ＜ ±1.0℃
Humidity Range: 20 ～ 95%
Humidity Deviation:＜ ±3%RH
Capacity: 430L~830L
Environment temperature: +5 ～ 35℃

The XCH-520SD medical stability testing chamber Medicine Stability Chamber, two boxes are independently controlled, climatic test, CSD series, A box has temperature, the three functions of humidity and light can be equipped with near-ultraviolet lamps to meet the requirements of the guidelines for the stability test of the 2020 edition of the Pharmacopoeia; Box B only controls and records.

Model: XCH-520SD

Temperature Range: 10~65℃

Temperature Fluctuation: ＜±0.5℃

Temperature deviation: ＜±1.0℃
Humidity Range: 20~95%RH
Humidity deviation:  ＜ ±3%RH
Power: AC 220V±10% 50HZ
Environment temperature: +5 ～ 35℃

The XCH-620SD medical stability testing chamber Medicine Stability Chamber, two boxes are independently controlled, climatic test, CSD series, A box has temperature, the three functions of humidity and light can be equipped with near-ultraviolet lamps to meet the requirements of the guidelines for the stability test of the 2020 edition of the Pharmacopoeia; Box B only controls and records.

Model: XCH-620SD

Temperature Range: 10~65℃

Temperature Fluctuation: ＜±0.5℃

Temperature deviation: ＜±1.0℃
Humidity Range: 20~95%RH
Humidity deviation:  ＜ ±3%RH
Power: AC 220V±10% 50HZ
Environment temperature: +5 ～ 35℃

XCH-250TPS photostability chamber is a temperature controlled chamber, equipped with visible light and near-ultraviolet lamp tube, Medicine Stability Chamber can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled.

Model: 250TPS

TEMP Range: 15~50℃

Fluctuation: ＜±1℃

TEMP Deviation: ＜ ±2.0℃(SAME LEVEL)
Light Range: Visible light range: 100 ~ 8000LUX
Total illumination should not be less than 1.2 x 10^6Lux·hr
UV range: NUV range: 0.84 ~ 5w/m squared; The near-UV energy is no less than 200w•hr/㎡
UV wavelength: NUV wavelength: 320 ~ 400nm;

XCH-250MJ Mold incubator, also known as Mildew incubator. Equipped with UV germicidal lamp, you can choose humidification or no humidification (XCH-MJS series is equipped with humidification function).

Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation.

Model: 250MJ

Temp.Range: 0℃～60℃

Deviation: ±1.0℃

Capacity: 250L

Environment Temperature: +5 ～ 35℃

Installed Power: AC220V±10% 50HZ

XCH-400MJ Mold incubator, also known as Mildew incubator. Equipped with UV germicidal lamp, you can choose humidification or no humidification (XCH-MJS series is equipped with humidification function).

Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation.

Model: 400MJ

Temp.Range: 0℃～60℃

Deviation: ±1.0℃

Capacity: 400L

Environment Temperature: +5 ～ 35℃

Installed Power: AC220V±10% 50HZ

XCH-500MJ Mold incubator, also known as Mildew incubator. Equipped with UV germicidal lamp, you can choose humidification or no humidification (XCH-MJS series is equipped with humidification function).

Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation.

Model: XCH-500MJ

Temp.Range: 0℃～60℃

Deviation: ±1.0℃

Capacity: 500L

Environment Temperature: +5 ～ 35℃

Installed Power: AC220V±10% 50HZ

XCH-800MJ Mold incubator, 800L capicity, Temperature Range 0-60℃. Equipped with UV germicidal lamp, you can choose humidification or no humidification (XCH-MJS series is equipped with humidification function).

Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation.

Model: XCH-800MJ

Temp.Range: 0℃～60℃

Deviation: ±1.0℃

Capacity: 800L

Environment Temperature: +5 ～ 35℃

Installed Power: AC220V±10% 50HZ

XCH-1000MJ Mold incubator, 1000L capicity, Temperature Range 0-60℃. Equipped with UV germicidal lamp, you can choose humidification or no humidification (XCH-MJS series is equipped with humidification function).

Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation.

Model: XCH-1000MJ

Temp.Range: 0℃～60℃

Deviation: ±1.0℃

Capacity: 1000L

Environment Temperature: +5 ～ 35℃

Installed Power: AC220V±10% 50HZ

XCH-250MJS Mold incubator, Humidity Equipped. 150L capicity, Temperature Range 10-60℃. Equipped with UV germicidal lamp.

Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation.

Model: XCH-250MJS

Capacity: 250L

Temp.Range: 10℃～60℃ Temperature Fluctuation: ±2.0℃

Humidity Range: 50-90%RH Humidity Fluctuation: ±5%RH

Environment Temperature: +5 ～ 35℃

Installed Power: AC220V±10% 50HZ

XCH-150LRH Biochemical Incubator uses the latest air duct system to achieve the best level of uniformity of temperature and humidity in different positions inside the chamber. The bod cooling incubator Polyurethane foam technology is adopted, good insulation, energy saving. Provides precise temperature control for reliable results in pharmaceutical, industrial testing, food, cosmetics, and microbiological research.

LHR Series Biochemical Laboratory incubators is applied to scientific research and production departments such as environmental protection, sanitation and epidemic prevention, agricultural and livestock aquatic medicine detection and cell culture.

Model: 150LRH
Capacity: 150L
TEMP: 0~60℃
Fluctuations: High TEMP ≤ ±0.5℃ ; Low TEMP ≤ ±1.0℃
Uniformity ≤ ±1.5℃ （@25℃）
Installed Power: AC220V±10% 50HZ
Environmental Temperature: +5~35℃

XCH-250LRH Biochemical Incubator uses the latest air duct system to achieve the best level of uniformity of temperature and humidity in different positions inside the chamber. The bod cooling incubator Polyurethane foam technology is adopted, good insulation, energy saving. Provides precise temperature control for reliable results in pharmaceutical, industrial testing, food, cosmetics, and microbiological research.

LHR Series Biochemical Laboratory incubators is applied to scientific research and production departments such as environmental protection, sanitation and epidemic prevention, agricultural and livestock aquatic medicine detection and cell culture.

Model: 250LRH
Capacity: 250L
TEMP: 0~60℃
Fluctuations: High TEMP ≤ ±0.5℃; Low TEMP ≤ ±1.0℃
Uniformity ≤ ±1.5℃ （@25℃）
Installed Power: AC220V±10% 50HZ
Environmental Temperature: +5~35℃

XCH-400LRH Biochemical Incubator & Cooling Incubator uses the latest air duct system to achieve the best level of uniformity of temperature and humidity in different positions inside the chamber. The bod cooling incubator Polyurethane foam technology is adopted, good insulation, energy saving. Provides precise temperature control for reliable results in pharmaceutical, industrial testing, food, cosmetics, and microbiological research.

LHR Series Biochemical Laboratory incubators is applied to scientific research and production departments such as environmental protection, sanitation and epidemic prevention, agricultural and livestock aquatic medicine detection and cell culture.

Model: 400LRH
Capacity: 400L
TEMP: 0~60℃
Fluctuations: High TEMP ≤ ±0.5℃; Low TEMP ≤ ±1.0℃
Uniformity ≤ ±1.5℃ （@25℃）
Installed Power: AC220V±10% 50HZ
Environmental Temperature: +5~35℃

XCH-500LRH Biochemical Incubator & Cooling Incubator uses the latest air duct system to achieve the best level of uniformity of temperature and humidity in different positions inside the chamber. The bod cooling incubator Polyurethane foam technology is adopted, good insulation, energy saving. Provides precise temperature control for reliable results in pharmaceutical, industrial testing, food, cosmetics, and microbiological research.

LHR Series Biochemical Laboratory incubators is applied to scientific research and production departments such as environmental protection, sanitation and epidemic prevention, agricultural and livestock aquatic medicine detection and cell culture.

Model: 500LRH
Capacity: 500L
TEMP: 0~60℃
Fluctuations: High TEMP ≤ ±0.5℃; Low TEMP ≤ ±1.0℃
Uniformity ≤ ±1.5℃ （@25℃）
Installed Power: AC220V±10% 50HZ
Environmental Temperature: +5~35℃

XCH-1000LRH Biochemical Incubator & Cooling Incubator uses the latest air duct system to achieve the best level of uniformity of temperature and humidity in different positions inside the chamber. The bod cooling incubator Polyurethane foam technology is adopted, good insulation, energy saving. Provides precise temperature control for reliable results in pharmaceutical, industrial testing, food, cosmetics, and microbiological research.

LHR Series Biochemical Laboratory incubators is applied to scientific research and production departments such as environmental protection, sanitation and epidemic prevention, agricultural and livestock aquatic medicine detection and cell culture.

Model: 1000LRH
Capacity: 1000L
TEMP: 0~60℃
Fluctuations: High TEMP ≤ ±0.5℃; Low TEMP ≤ ±1.0℃
Uniformity ≤ ±1.5℃ （@25℃）
Installed Power: AC220V±10% 50HZ
Environmental Temperature: +5~35℃

The XCH-620SD medical stability testing chamber Medicine Stability Chamber, two boxes are independently controlled, climatic test, CSD series, A box has temperature, the three functions of humidity and light can be equipped with near-ultraviolet lamps to meet the requirements of the guidelines for the stability test of the 2020 edition of the Pharmacopoeia; Box B only controls and records.

Model: XCH-620SD

Temperature Range: 10~65℃

Temperature Fluctuation: ＜±0.5℃

Temperature deviation: ＜±1.0℃
Humidity Range: 20~95%RH
Humidity deviation:  ＜ ±3%RH
Power: AC 220V±10% 50HZ
Environment temperature: +5 ～ 35℃

The XCH 320-620CSD medical stability testing chamber Medicine Stability Chamber, two boxes are independently controlled, climatic test, CSD series, A box has temperature, the three functions of humidity and light can be equipped with near-ultraviolet lamps to meet the requirements of the guidelines for the stability test of the 2020 edition of the Pharmacopoeia; Box B only controls and records.

Model: XCH-320-620CSD

Temperature Range: 15~65℃

Temperature Fluctuation: ＜±0.5℃

Temperature deviation: ＜±1.0℃
Humidity Range: 20~95%RH
Humidity deviation:  ＜ ±3%RH
Power: AC 220V±10% 50HZ
Environment temperature: +5 ～ 35℃