Blog

Laboratory drying ovens are standard equipment in most laboratories and are used for high forced volume heat convection applications. Regardless of the set temperature, they can provide uniform heating for the entire device. Generally speaking, most laboratory ovens are manufactured at temperatures ranging from ambient temperature to about 300°C. Ovens with higher operating temperatures are generally used for professional applications in the fields of physics, material processing, and electronics. Other uses include annealing, die bond curing, drying, polyimide baking, and sterilization. We will discuss the topic of vacuum drying, which is the use of vacuum and heating to remove large amounts of absorbed water or other solvents from the product. The liquid to be removed is usually a natural part of the product, a residue from a previous operation, or used to dissolve, mix, or apply chemicals as part of the process design. Although freeze-drying is carried out using vacuum in the drying process, the freeze-drying process is not involved here. A vacuum drying oven is a very cool and useful tool. You can use this tool for multiple purposes like removing moisture, degassing, baking out, and preventing reactions. There are many products that need to be dried in a vacuum oven, such as medicines, implantable medical devices, satellites and other space hardware, temperature-sensitive products with retained moisture, epoxy resin; it can be dried by vacuum, food analysis (allowed for packaging food Moisture) essential oils extracted from plants. The working principle of the vacuum drying oven: To dry, the moisture must change from liquid to gaseous. After the vacuum furnace reduces the pressure, this reduces the temperature at which the water evaporates from the liquid state to the gas state. After that, this pressure change causes the water to evaporate, thereby drying at a lower temperature. Under vacuum, water always boils at a lower temperature. Benefits of the vacuum drying oven: As mentioned earlier, the vacuum drying oven has many advantages. Because the oxygen content is very low, vacuum drying does not require an oxidation process. The next advantage is continuous drying without hard skin on the top. Another advantage is that it absorbs moisture from hard-to-reach corners and crevices. The evaporated and vacuum dried fluid can be recovered later. Another benefit of vacuum drying is the gentle way, because this drying will not even disturb light and powdery items. The most important benefit of vacuum drying is that it reduces the risk for workers. It likes to prevent the exhaust of hazardous solvents and chemicals from being trapped instead of entering the surrounding air. Vacuum drying ovens are used in many industries, such as aerospace industry, medical industry, electronics, etc. If you want to know more about vacuum drying, please click XCH Biomedical.

Temperature and humidity test is a general term. It is an engineering and manufacturing summary of a series of environmental stress tests, such as high/low temperature tests, moisture resistance tests, or temperature cycling tests. Procedures such as temperature and humidity deviation testing also belong to the umbrella. No matter what each test type is called, they all determine the performance or behavior of the complete system, subsystem, and individual components of the finished product under normal and harsh environmental conditions. In most cases, the extreme changes are temperature and humidity. However, other environmental factors such as sand, dust, corrosion and vibration also fall into the scope of performance testing. Technicians conduct temperature and humidity tests by immersing the product in an artificial environment. It involves a test room where temperature and humidity changes are induced, controlled, monitored and evaluated. The test chamber usually includes a vibrating table and equipment that regulates exposure to abrasives such as sand and dust. The size of the test room varies. Some chambers are small and are designed to test tiny components such as circuit boards and controllers. The medium-sized chamber allows larger objects or small products with multiple loads to be tested on a large scale. Sometimes, very large candidates like vehicles and machines need to be tested for temperature and humidity. Custom test chambers are usually built for these applications. Use temperature and humidity test chamber for stability test Whether it is used for medicines, cosmetics, textiles, food and beverages or electronic products, the stability test chamber is one of the processes used by companies to determine that their products remain safe and functional on the shelf or under certain environmental conditions. Almost no industry does not require stability testing. While focusing on evaluating the durability of the product, the stability test is also used to evaluate the accompanying packaging. These products change hands and the environment throughout the chain of custody. They should be kept safe and protected during transportation, storage and anticipated use. The list of products suitable for temperature and humidity testing is long. This actually depends on the expected working environment of the product. The type of test also depends on the industry in which it is applied. The following are some common industries where temperature and humidity tests are performed on a regular basis: aerospace car defense vitality telecommunications medical Each industry has its own unique products and individual specifications and test parameters. The list varies by industry and intended application. The following only lists some products and objects suitable for temperature and humidity testing: Electrical components Engine assembly Batteries and solar panels Medical diagnostic products Medicine container Military ammunition and weapons Adhesives and caulks Glass product Further considerations when purchasing a medicine stability test chamber There are a few things to keep in mind when buying a temperature and humidity cabinet for steady-state testing. Size really matters. If you test multiple products or a large product at the same time, this will determine what you need to use in a chamber. Another consideration is the type of testing you anticipate. For example, if you need to perform stability testing in addition to cyclic testing (or other iterative testing), it is best to invest in a chamber with power components to quickly change conditions. XCH Biomedical provides various types of medical temperature/humidity test chambers, including single, double, and three-chamber types, with three functions: temperature, humidity, and light. Alarm system, double room single control, safe and reliable. Low price. They come with installation and operating instructions, as well as installation and maintenance instructions.

Medical refrigerators have a microprocessor-based system that can accurately measure temperature. They use digital sensors (such as thermocouples, resistance temperature detectors [RTD], and thermistors) to monitor internal temperature. These devices also have a fast temperature recovery device that can respond to temperature readings that are out of range. A large part of the reason that distinguishes medical refrigerators or glass-door display freezers from household appliances is the guarantee of temperature stability. Many medical samples and supplies need to maintain a consistent temperature in order to stay alive. Change can mean the loss of much-needed drugs, blood donations, and destroyed products, which cost countless research, time, and money. Different medical compounds have different temperature requirements, all of which need to be monitored and adjusted. For example, in the case of vaccines, this varies from product to product. It must be maintained at +2°C from the time of manufacture to when the vaccine is used for individuals. Temperature range to +8°C. Most vaccines are considered damaged at 0°C, but because damaged or frozen vaccines may not be visually solid or change in appearance, glass-door refrigerator units must be equipped with an accurate digital thermostat to continuously monitor the internal temperature. Ideally, the refrigerator display cabinet is also equipped with a health timer that can automatically lock the device when the temperature rises or falls, above or below the set safety threshold. As far as vaccines are concerned, this will be a temperature higher than +8°C. Characteristics of medical refrigerators: Temperature stability, uniformity and recovery One of the most important characteristics of medical-grade refrigerators is their ability to maintain a uniform temperature throughout the cabinet. They use a forced air circulation system specifically designed for pharmacy applications to maintain an extremely tight uniformity, usually within +/- 1.5 degrees Celsius. They can also quickly return to the set temperature after the door is opened. Accurate temperature monitoring and alarm system On-site temperature deviation sound and light alarm, standard remote mobile phone SMS alarm (with power failure alarm), multiple devices use one mobile phone card; all high-quality medical-grade refrigerators are equipped with door alarms, if it breaks at any time, It will sound to prevent this from happening. Thermostat control There is nothing worse than turning the knob of a consumer refrigerator almost one millimeter to get the temperature just right. It not only takes longer to set it at the correct temperature, but it is also more risky, because even if someone gently touches the knob, it may cause a big change in temperature. Whenever I insist on using a consumer model, setting the temperature is a nightmare. Reliable and stable temperature for safe storage of vaccines, drugs, creams or samples. The digital display allows you to confirm the temperature without opening the door. Promote better air flow Compared with household appliances, medical-grade appliances are designed with better airflow. The pharmaceutical unit relies on a powerful fan forced air circulation system and air cooling vents. Their internal shelving system can also circulate air efficiently and maintain a uniform temperature. They use wire racks with perforated vents. Other specially constructed systems include drawers with solid fronts (and wire interiors) to protect vaccines and samples from ambient temperature and promote uniform air circulation. Many medical refrigerators and freezers have alarm systems that can notify suppliers when the airlock is not sealed or the door is ajar. Protect biological products from temperature drift caused by power failure Even if the provider uses appropriate equipment and consistent temperature monitoring practices, a power failure can damage your vaccine supply. These interruptions may disrupt the entire vaccine supply. Most facilities should have an on-site generator to prevent transportation of their vaccine supplies to alternative storage facilities during power outages. The supplier should have enough fuel in the facility to run the generator for 72 hours. If your healthcare facility does not have a generator, your medical refrigerator or freezer can protect your products. Most have backup batteries to prevent temperature drift. Medical refrigerators and freezers provide additional advantages because they have battery backup power and can be used in place of generators. If there is a power failure, please close the appliance door to maintain the internal temperature. Your facility should also have a second battery backup system in case the first battery fails. Medical glass door refrigerators and freezers are the lasting investment you want. Choosing a reliable brand XCH Biomedical and all the functions required for medical equipment will give you peace of mind in the coming years.

Human beings are very dependent on drugs from birth. Poliomyelitis drops, vaccines, wound treatments, eye drops, medications for the elderly. There are different drugs for different life stages. These drugs are produced using chemical analysis, biotechnology, microbial cultures, etc. These medicines are just drops of life. If it is produced incorrectly, it can be devastating for the person who eats it, leading to his death. Different types of stability studies have been carried out for these aspects. Established a medical compliance agency. ICH, USFDA and other institutions were established. These pharmaceutical compliance agencies have established standards for manufacturers to follow. Unless these compliance agencies do not provide them with a license to do so, it can ensure that pharmaceutical manufacturers cannot market or sell their products. Before issuing a license, the pharmaceutical agency will check the QA analysis of the drugs produced. It is necessary to check the chemical composition, check the uniformity of the drug, and check the behavior of the drug under different climatic conditions. Pharmaceutical manufacturers need to check the behavior of their products through different stages of quality analysis. One of the stages is "stability". The stability of the product in different environments. Different environmental conditions, such as humidity, temperature, ultraviolet radiation, etc., are artificially generated in a stable room. Heat, humidity and light are all causes of product degradation. Regulatory committees, such as the Federal Drug and Food Administration (FDA), ensure that appropriate precautions are taken to maintain consumer safety. Establishing product integrity in different climatic zones is critical, because small changes in temperature and humidity will affect the drug. Carry out stability storage and test studies to simulate climate effects. These studies are based on where the product is sold. Understanding all the ways in which finished products or active pharmaceutical ingredients (APIs) are affected by degradation is critical to the storage of these products. Through these studies, XCH Biomedical can determine the shelf life of the drug, determine the best storage method for the drug, and ultimately help ensure the safety of consumers. What is a stability test chamber? Most stability test chambers are similar to a large scientific refrigerator. Their function is not to keep things cool, but to replicate changes in temperature, humidity, and light for a long time. For example, this is critical when a pharmaceutical company wants to bring a new product to the market. 1. Humidity test The accuracy and repeatability, reliability and durability of the parameters in continuous operation are the primary tasks of the humidity test chamber. The sturdy stainless steel interior should be corrosion resistant and designed to be easy to clean. The programming must be intuitive, and the documentation must meet the requirements of FDA 21 CFR Part 11. Calibration certificates, data loggers and verification documents should of course also be included. 2. Light In the case of light stability test according to ICH Q1B, light supplement temperature and humidity are used as additional parameters. Specify the light source and lighting level for each time unit. Visible light (VIS is similar to ISO 10977 (1993)) must reach an exposure time of at least 1.2 million lux per hour, and near ultraviolet light must be at least 200 hours/m² (320 nm to 400 nm). As with temperature and humidity, uniform light distribution on each shelf is critical. Here, the basic specifications are the intensity distance, and the type of sensor and reflector used 3. Accelerated research or forced degradation is used to predict the shelf life of products. Scientists accelerate the process and speed of decomposition/degradation by increasing the temperature and/or humidity of environmental conditions in a short period of time. These accelerations indicate that if it is introduced to extreme conditions in a short period of time, it will have an impact on the drug. Overall, this gives a general overview of the different characteristics of degradation, including physical, chemical, and microbiological.